Aquatic & Fisheries

You are here : Products > Accessories > Aquatic & Fisheries


Communication Box
The DST's are operated with our software and a Communication Box, which is connected to a PC. All communication and data transfer is wireless via the box. The Com Box comes with a power supply, 9 pin serial cable, a USB serial converter cable and a hard plastic case that also fits several data loggers. The box comes in four different sizes, the same as our DST sizes, centi, milli, micro and nano. Each size requires its own Communication Box. Communication Box
SeaStar is our main graphical Windows supporting software for Aquatic and Fisheries Research and Other Industries. It is compatible with all our recorders and offers various options for measurement settings prior to deployment and after data retrieval. It offers graphical and tabular analysis of the recordings.
Plastic Protective Housing
Star-Oddi offers protective housing for the DST to give more flexible mounting options and to protect the data logger when used under more harsh environmental conditions. When used as a stand alone logger it can be attached fishing gear, moorings, deployment lines or other equipment. It has attachment points (6 mm in diameter) on top and bottom. The protective housing is made of polyurethane (PUR) plastic. The housing dimensions are 75 mm in length x 30 mm in diameter. Weight is 50 g in air and 10 g in water. Plastic Protective Housing
Wire Fasteners for Protective Housing and Starmon mini
Wire fasteners for DST protective housings and Starmon mini Temperature Recorders. Ideal for fastening the equipment to fishing gear, long lines. For use in fixed positions and in harsh environment. The wire fasteners are made of non-corrosive stainless steel with two clamps to ensure secure fastening. The length of the wires can be adjusted to fit the application. Wire fastener
Adjustable Housing for DSTs with tilt and/or compass sensors
When measuring tilt and compass directions with the DST's it is important that the loggers do not roll on the object being studied. When attached to gear we recomend using Adjustable Housing for DST tilt, DST pitch & roll and DST magnetic. The DST logger is inserted into the housing and rolled until the marking on logger matches with the marking on the housing. Stainless steel clamps inside the housing are used to fasten the logger in an approximate central position. The shape of the housing is designed to be fastened/bolted/screwed to underwater gear/equipment or strapped to a cable. The weight of the housing is 125 g in air. Dimensions are 7 cm x 4.7 cm x 4 cm. housing for tilt and/or compass sensors
Stainless Steel Protective Housing for DSTs
Star-Oddi offers stainless steel protective housing for DST loggers (we recommend using them with a plastic housing to give extra protection). It is ideal when fastening to cables, moorings or fishing gear. Dimensions of the steel housing are 125 mm x 42.4mm. Thickness is 3.25mm and it weighs 356 g in air.
Stainless Steel Protective Housing for Starmon TD
This steel housing was designed for the Starmon TD. It is ideal when used in extreme conditions for example on fishing trawls. In addition to protecting the temperature depth recorder it gives more attachment points, for securely fastening the data logger to the subsea gear. The housing comes with plastic sleeves around the bolts and two sleeves that are put on logger housing. With the use of the plastic material the logger sits firmly inside the steel housing, avoiding scratches on the housing under harsh use. The thickness of the steel is 3.5 mm.
Stainless Steel Protective Housing for Starmon
Star-Oddi offers stainless steel protective housing for Starmon mini. It is ideal when fastening to cables, moorings or fishing gear. It has brackets inside designed for the Starmon mini to fit in. Dimensions of the steel housing is 206 mm x 40 mm and weight in air is 360 g.
Starmon mini
Communication Cable
To connect to the Starmon mini underwater temperature recorders a communication cable is used. It is connected between the recorder and a PC computer. The cable has a RS-232C standard 9 pin serial interface that connects to a PC, but a USB serial converter cable is also supplied. Communication cable
Fastener kits for external tagging

Plate Holder Kit
The Plate Holder Kit consists of wire fasteners, a plastic plate for holding the tag, a plastic plate on the opposite side, and silicon pads for external attachment on fish and other subjects. Star-Oddi can also provide needles for the tagging process if needed. The plate holder kit is available for the centi and milli sized loggers. For instructions on how to use the Plate Holder Kit click here. Weight of the fastening kit is ca. 15 g. in air. Various thickness of wires is available.

Capsule Holder Kit
The Capsule Holder Kit is a plastic capsule that has 2 mm holes on each end. The capsule has holes on each end, ensuring water flow to the sensors. In addition to the capsule the kit comes with a wire harness, plastic plate and two silicone pads for placing under the capsule to prevent descaling and the plastic plate. The capsule holder kit is available for all logger sizes: centi, milli and micro.

Fish tagging kit

Floating device for DSTs
Star-Oddi offers a floating device for the DST loggers. Each float is 25.5 mm in length. Dimension depends on size of tag but can be customized, depending on number of capsule floats desired. As an example if using three floats with the DST milli type the dimension needs to be 11 mm. The floats can be used both for internal and external tagging. It is possible to choose a bright color, for example orange, to make them easy to spot. For internal tagging the floats are coated with biocompatible material.