Below you can download the latest version of the Star-Oddi application software. We recommend updating the software regularly so you will benefit from our latest developments.

Product key

A product key is needed to run the application software. The product key is delivered with the purchase of a software, and located in the cover of the Quick start guide. The software is a one time purchase and all upgrades are free of charge.

SeaStar 9.59 (46 MB)
Change log


Mercury 6.69 (45 MB)
Change log
HRT Analyzer 1.3.2 (223 MB)
Change log

  User Manual  Tutorial

Gná 1.36 (25 MB)*
Change log
FoodStar 4.59 (22 MB)
Change log
PatternFinder 1.24 (30 MB)
 Change  log

*For telemetry system
Minimum system requirements: Windows XP or newer version

USB driver installation

The appropriate USB driver should automatically install on your computer when the device is connected to an internet-connected PC computer.
If the USB driver does not install automatically, for example, if administrative permissions are required to install applications on the computer, you can download and install the driver manually.

Connection Wizard


How to know if the driver is missing:

If the driver is not installed, no communication port will appear in the Connection Wizard.

Please select the relevant driver below:

DST logger connection via communication box

Communication box

This applies to either a standard USB port or a USB-C cable (provided by Star-Oddi).

Download the communication box driver.

FTDI Chipi-x10 converter

For a communication box with an RS232 serial cable, we recommend using the FTDI Chipi-x10 serial to USB converter, which uses the same driver as above.

Starmon logger connection via USB cable


Use the Zadig software for the driver setup.
  1. Download the Zadig driver
  2. Run Zadig
  3. Choose Starmon TD/Starmon Tilt/Starmon Compass/Starmon Mini from the list. If it is not present, then select Options > List All Devices.
  4. Install the WinUSB driver

For older Starmon mini loggers

StarCom cable with converter
If you are using an older version of Starmon mini that uses the StarCom cable with an RS232 serial port and an FTDI Chipi-x10 converter, download the FTDI Chipi-x10 driver.